Skip to product information
1 of 2

Flex Fletch

FLEX FLETCH Primer and Glue Combo

FLEX FLETCH Primer and Glue Combo

Regular price $39.99 CAD
Regular price Sale price $39.99 CAD
Sale Sold out
Shipping calculated at checkout.

Zing! Fletching Primer Pen Makes Fletching Arrows a Breeze!

The Zing! Fletching Primer Pen is the easiest, fastest, and strongest way to fletch your arrows.

Zing! fletching primer was the first primer to break onto the archery scene in the United States and is still the leader. It is an ozone friendly primer used to prepare polyolefin surfaces for bonding with cyanocrylate adhesives (CA). It speeds up the adhesion process and strengthens it when bonding with Zing! adhesion glues.

How To Use the Zing! Fletching Primer Pen

The Zing! Fletching Primer Pen uses a plunge-action to wet the fiber tip with the correct amount of primer for precision application of the primer to the base of the vane or other plastic/rubber parts. There's no waste and no mess, even if you forget to put the cap back on! It is ideally used with a Zing! Kling adhesive tube. It also works well with most other cyanoacrylate adhesives. Not intended for use with solvent type adhesives such as Flex-Bond, Saunder NPV, or Bohning Platinum.

  • Dry Time: 15-30 seconds
  • On-Part Life: 5 minutes
  • Ideal Adhesive: Zing! Kling Adhesive Tube
  • Full cure with Zing! Kling Adhesive Tube: 8 hours (24 hours without Zing! Fletching Primer)
  • Product Size: 11 gm pre-loaded plunge-tip pen
  • Also available in a pint

Zing! Kling Adhesive Tube for Fletching

Zing! Kling Adhesive provides the fletcher with confidence that the process of fletching will be trouble-free and that the vanes will stay on. Zing! Kling is think enough to resist running and rubber-toughened to withstand high-speed abuse. It is the toughest fletching adhesive on the market!

How To Use the Zing! Kling Adhesive Tube

Surfaces to be bonded should be clean and dry. Apply only enough to leave a thin film layer after compression. Press parts together and hold firmly for a few seconds. Good contact is essential and an adequate bond develops in less than one minute. For a quicker cure time and stronger bond, use a Zing! Fletching Primer Pen or Pint beforehand.

  • Optimal Set-Time: 30-60 seconds
  • Full cure: 24 hours
  • Full cure with Zing! Primer: 8 hours
  • Product Size: 0.7oz / 20g tube
  • Extra Spout / Cap: Encase mistakes happen, an extra spout / cap is included
View full details